4WP2D High Speed Worm Gear Serie
Bis zu 1.500 Pfund Kapazität
Brauchen Sie etwas mehr Geschwindigkeit? Der 4WP2D8 ist ein Direktantriebsaggregat, das bei etwas geringerer Nennlast für zusätzlichen Schub sorgt.
Schnelle Fakten
- Direktantriebsdesign
- Maschinell geschnittene Schneckenräder aus Bronze
- Geschlossenes Ölbad
- Interne mechanische Bremse
- Kugellager
- Druckplatte
- Kabelanker mit Doppelfunktion
- Montagemöglichkeiten
- 2 Jahre eingeschränkte Garantie
Serienmodelle
- 4WP2D8
- 4WP2DC
Benötigen Sie ein Angebot?
Wenn Sie nicht sicher sind, welches Produkt Sie benötigen und ein Angebot wünschen, füllen Sie bitte ein Anfrageformular aus.
4WP2D High Speed Worm Gear — Modell 4WP2D8 Atlas High-Speed Worm Gear Tragbare elektrische Winde.
115/1/60 Electric Motor
Standard 115-volt single-phase motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
Direct Drive Design (4WP2D models only)
Winch delivers high speed operation in both directions, even under full load.
Modular Design
Easy product customization and quick lead times.
Cast Aluminum Construction
Rugged work site durability in a lightweight package.
Machine Cut Worm Gears
Bronze gearing provides accurate, high efficiency operation and long lasting service.
Enclosed Oil Bath
Gears operate with continuous lubrication to minimize wear. Oil seals keep oil in and dirt out.
Automatic Brake
Internal mechanical brake provides positive load control for lifting and lowering operations.
Bronze Ball Bearings
Bearings are self-aligning and provide smooth and efficient operation.
Large Diameter Drums
Minimize wear to extend wire rope life.
Pressure Plate
Applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models.
Dual Function Cable Anchor
Drum is equipped with both a standard set screw slot and keyhole slot on drum for quick disconnect with 3/8 inch swaged ball ends.
Lifting Handles
Handles provide for convenient work site lifting and positioning.
Corrosion Resistant
Durable paint finish combined with trivalent zinc plating protects against corrosion in harsh environments.
Two-Year Warranty
Industry-leading two-year limited warranty on all our products.
Vertical Lead Block
The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series.
Clutch
Manual clutch allows operator to disengage the drum for quick wire rope payout if desired. Not available on models equipped with pressure plate.
Mounting Options
Floor, wall, or ceiling mount configurations available.
Emergency Hand Crank
Allows for manual operation in case of power failure. Does not include handle.
Rotary Limit Switches
Provides secondary shut-off to limit load travel in one or two directions. Not available on clutch models.
Internal Mechanical Brake
Available for motor brake models to provide dual braking.
Special Motors and Controls
Available in a wide range of standard and custom configurations for single or variable speed, including severe duty and explosion proof. Motors also available in hydraulic and pneumatic.
Special Finishes
Available for operation in harsh or hazardous environments.
Torque Limiters
Available as part of the motor controls on electric models.
Owner’s Manual
Product Sheet
Digital_Atlas 4WP2 Product Sheet (PS4WP2-A-0221)
At A Glance
Industrial Brochure
Häufig gepaart mit
Kundenspezifische Kräne und Winden
Elektrische Steuerungen
