TREUIL PORTATIF ELECTRIQUE PORTATIF DE VITESSE 4WP2D SÉRIE 4WP2D
Capacité maximale de 1 500 lb
Besoin de plus de vitesse? Le 4WP2D8 est une unité à entraînement direct qui fournit cette poussée supplémentaire avec une charge légèrement inférieure.
FAITS EN BREF
Conception à entraînement direct
Bronze découpé à la machine
engrenages à vis sans fin
bain d’huile inclus
Frein mécanique interne
Roulements à billes
Plaque de pression
Ancrage de câble double fonction
Options de montage
Garantie limitée de 2 ans
MODÈLES DE SÉRIE
4WP2D8
4WP2DC
BESOIN D’UN DEVIS?
Si vous n’êtes pas sûr du produit dont vous avez besoin et souhaitez un devis, veuillez remplir un formulaire de demande.
Treuil portatif à engrenages à vis sans fin Atlas, modèle 4WP2D8
Features Performance Specs Accessories/Options Dimensions Controls Resources
115/1/60 Electric Motor
Standard 115-volt single-phase motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
Direct Drive Design (4WP2D models only)
Winch delivers high speed operation in both directions, even under full load.
Modular Design
Easy product customization and quick lead times.
Cast Aluminum Construction
Rugged work site durability in a lightweight package.
Machine Cut Worm Gears
Bronze gearing provides accurate, high efficiency operation and long lasting service.
Enclosed Oil Bath
Gears operate with continuous lubrication to minimize wear. Oil seals keep oil in and dirt out.
Automatic Brake
Internal mechanical brake provides positive load control for lifting and lowering operations.
Bronze Ball Bearings
Bearings are self-aligning and provide smooth and efficient operation.
Large Diameter Drums
Minimize wear to extend wire rope life.
Pressure Plate
Applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models.
Dual Function Cable Anchor
Drum is equipped with both a standard set screw slot and keyhole slot on drum for quick disconnect with 3/8 inch swaged ball ends.
Lifting Handles
Handles provide for convenient work site lifting and positioning.
Corrosion Resistant
Durable paint finish combined with trivalent zinc plating protects against corrosion in harsh environments.
Two-Year Warranty
Industry-leading two-year limited warranty on all our products.
Model Number Extensions
Load Rating
Line Speed
Drum Capacity 2
Model No.
Load Rating
Line Speed
Motor Codes
Motor
HP
1st Layer
Mid Drum
Full Drum
Wire
Rope
Dia.1
1st Layer
Full Drum
1st Layer
Mid Drum
Full Drum
Approx. Ship Weight 3
(lb)
(kg)
(fpm)
(mpm)
(lb)
(kg)
(lb)
(kg)
(lb)
(kg)
(in)
(mm)
(fpm)
(mpm)
(fpm)
(mpm)
(ft)
(m)
(ft)
(m)
(ft)
(m)
(lb)
(kg)
High Speed Atlas winches for lifting or pulling
4WP2D8
800
362.8
26
7.9
A,B,D,E
1
800
362.8
460
208.6
330
149.6
1/4
6.4
26
7.9
65
19.8
19
5.7
130
39.6
280
85.3
100
45.3
4WP2D8
800
362.8
40
12.1
D,E
1.5
800
362.8
460
208.6
330
149.6
1/4
6.4
40
12.1
97
29.5
19
5.7
130
39.6
280
85.3
100
45.3
4WP2D8
1500
680.3
26
7.9
D,E
2
1500
680.3
900
408.2
600
272.1
1/4
6.4
26
7.9
65
19.8
19
5.7
130
39.6
280
85.3
100
45.3
4WP2D8
1500
680.3
40
12.1
B,D,E
3
1500
680.3
900
408.2
600
272.1
1/4
6.4
40
12.1
97
29.5
19
5.7
130
39.6
280
85.3
100
45.3
High Speed Clutch Models for HORIZONTAL PULLING ONLY
4WP2DC
800
362.8
26
7.9
A,B,D,E
1
800
362.8
460
208.6
330
149.6
1/4
6.4
26
7.9
65
19.8
12
3.6
87
26.5
190
57.9
100
45.3
4WP2DC
800
362.8
40
12.1
D,E
1.5
800
362.8
460
208.6
330
149.6
1/4
6.4
40
12.1
97
29.5
12
3.6
87
26.5
190
57.9
100
45.3
4WP2DC
1500
680.3
26
7.9
D,E
2
1500
680.3
900
408.2
600
272.1
1/4
6.4
26
7.9
65
19.8
12
3.6
87
26.5
190
57.9
100
45.3
4WP2DC
1500
680.3
40
12.1
B,D,E
3
1500
680.3
900
408.2
600
272.1
1/4
6.4
40
12.1
97
29.5
12
3.6
87
26.5
190
57.9
100
45.3
Please contact factory or nearest Thern distributor for firm fixed price and delivery.
1 Minimum wire rope diameter is 1/4 inch.
2 Actual drum capacities may be 25-30% less due to non-uniform winding. Wire rope tension will also affect drum capacity.
3 Weight may vary with motor.
Motor Codes
A
115 volt
1 phase
B
230 volt
1 phase
D
230 volt
3 phase
E
460 volt
3 phase
Vertical Lead Block
The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear.
Vertical Lead Block Series
Clutch
Manual clutch allows operator to disengage the drum for quick wire rope payout if desired. Not available on models equipped with pressure plate.
Mounting Options
Floor, wall, or ceiling mount configurations available.
Emergency Hand Crank
Allows for manual operation in case of power failure. Does not include handle.
Rotary Limit Switches
Provides secondary shut-off to limit load travel in one or two directions. Not available on clutch models.
Internal Mechanical Brake
Available for motor brake models to provide dual braking.
Special Motors and Controls
Available in a wide range of standard and custom configurations for single or variable speed, including severe duty and explosion proof. Motors also available in hydraulic and pneumatic.
Special Finishes
Available for operation in harsh or hazardous environments.
Torque Limiters
Available as part of the motor controls on electric models.
4WP2D Series - Winch Dimensions
4WP2D Series – Winch Dimensions
Model
A 1
B 1
C
D
E
F
H 1
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
4WP2D8
17.50
444.5
21.00
533.4
2.75
69.8
5.00
127
1.50
38.1
9.50
241.3
12.75
323.8
4WP2DC
19.00
482.6
21.00
533.4
4.00
101.6
5.00
127
3.50
88.9
9.50
241.3
12.75
323.8
Model
J
K
M
N
P
R
S (hole dia.)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
4WP2D8
2.25
57.1
5.81
147.5
10.25
260.3
1.25
31.7
7.00
177.8
11.50
292.1
0.41
10.4
4WP2DC
2.25
57.1
5.81
147.5
10.25
260.3
1.25
31.7
7.00
177.8
11.50
292.1
0.41
10.4
1 Dimensions A, B and H may vary with motor selection. Dimensions are for reference only and subject to change without notice.
IMPORTANT: It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
4WP2D Series - Drum Dimensions
4WP2D Series — Drum Dimensions
Model Extension
Drum Dia.
Flange Dia.
Drum Width
Fleet Angle Distance 1
(in)
(mm)
(in)
(mm)
(in)
(mm)
(ft)
(m)
4WP2D8
2.50
63.5
7.00
177.8
8.00
203.2
13
3.9
4WP2DC
2.50
63.5
7.00
177.8
5.50
139.7
9
2.7
1 Recommended minimum distance between drum and lead sheave for smooth drum. Dimensions are for reference only and subject to change without notice.
IMPORTANT: It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
4WP2D Series Control Options and Accessories
Model No.
Description
115/1/60 1
230/1/60
230/3/60
460/3/60
10L2A1
NEMA 1
to 1.5 hp
to 2 hp
to 3 hp
to 3 hp
10L7E1
NEMA 1
to 1.5 hp
to 3 hp
to 5 hp
to 7.5 hp
10L2A4
NEMA 4 — watertight
to 1.5 hp
to 2 hp
to 3 hp
to 3 hp
10L7E4
NEMA 4 — watertight
to 1.5 hp
to 3 hp
to 5 hp
to 7.5 hp
10P1A46
6-ft pendant control
to 1 hp
—
—
—
TPL-4WP2T8
Two-Part Line Kit
1 Controls for 115V single phase motors up to 1 hp include an 8-ft power cord with grounded plug.
Please contact factory or nearest Thern Distributor for firm fixed price and delivery.
CUSTOM CONTROLS are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments.