Flange Mounted Motor
Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.
Load Holding Motor Disc Brake
Brake is spring set, electrically released for positive load control.
Direct Drive Gear Reducer
Reducer is comprised of helical/worm gears and delivers lower efficiencies from 65% to 76% making winches well suited or applications requiring secure load control and accurate positioning.
The heat-treated helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.
Planetary Gear Drive
A compact design that results in a lighter weight winch compared to conventional gearing. Planetary gearing also provides a high peak load capacity.
Flange Style Roller Bearing
Bearings are self-aligning with cast housing to maintain smooth drum rotation.
Welded Steel Drum
Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.
Continuous Solid Steel Drum Shaft
Provides uniform winding or wire rope.
Wire Rope Assemblies
Sold separately per customer request.
AMSE B30.7 Compliance
Please contact the factory.
Industry-leading two-year “Move It With Confidence” limited warranty.
Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.
Available options include base, wall or under hung installation.
Cable Pressure Bars
Apply pressure to drum and wire rope to help maintain uniform winding.
Provide secondary shut-off for load travel in one or two directions.
Include air or hydraulic.
Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.
Include over-speed, caliper style, band, and more. Please contact the factory.
Available in a wide range of standard and custom configurations for single or variable speed.
Corrosion Resistant Finishes
For operation in harsh or hazardous environments.
For winch operation in power loss situations.