4HS Helical Spur Serie
5.000 bis 26.000 Pfund Kapazität
Die Motorwinden der 4HS-Serie verfügen über eine Kombination aus Schrägverzahnung/Kegelradgetriebe oder Schrägverzahnung/Parallelgetriebe und Stirnradgetriebe. Dadurch eignen sich diese Winden ideal für Anwendungen, die lange Verfahrwege und höhere Seilgeschwindigkeiten erfordern.
Schnelle Fakten
- Flanschrollenlager
- Geschweißte Stahltrommel
- Verlängerte Trommelwelle aus Stahl
- Drahtseilbaugruppen
- Flanschmontierter Motor
- Lasthaltemotor-Scheibenbremse
- Zweistufiges Getriebe
- AMSE-Konformität
- 2 Jahre eingeschränkte Garantie
Serienmodelle
- 4HS6M
- 4HS11M
- 4HS16M
- 4HS26M
- 4HS40M
- 4HS56M
Benötigen Sie ein Angebot?
Wenn Sie nicht sicher sind, welches Produkt Sie benötigen und ein Angebot wünschen, füllen Sie bitte ein Anfrageformular aus.
4HS Series — Modell 4HS16M Hochleistungs-Kraftwinde.
Flange Mounted Motor
Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.
Load Holding Motor Disc Brake
Brake is spring set, electrically released for positive load control.
Dual Stage Gearing
Gearing is comprised of a worm or helical/worm and spur gears, making winches well suited for applications requiring secure load control and accurate positioning. The heat-treated worm or helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double-lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards. Guarded, heat treated spur gearing provides secondary reduction. Grease zerks allow for easy lubrication.
Flange Style Roller Bearing
Bearings are self-aligning with cast housing to maintain smooth drum rotation.
Welded Steel Drum
Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.
Extended Steel Drum Shaft
Captures both ends in a fabricated steel frame for optimal strength and security.
Wire Rope Assemblies
Sold separately per customer request.
AMSE B30.7 Compliance
Please contact the factory.
Two-Year Warranty
Industry-leading two-year “Move It With Confidence” limited warranty.
Vertical Lead Block
The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series
Drum Modifications
Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.
Jaw Clutch
Clutch is manually operated and disengages for rapid payout of wire rope when not under load. Adjustable drag brake on the drum prevents over-spooling during payout. Clutch option is for horizontal pulling only.
Mounting Options
Available options include base, wall or under hung installation.
Cable Pressure Bars
Apply pressure to drum and wire rope to help maintain uniform winding.
Light Switches
Provide secondary shut-off for load travel in one or two directions.
Motors
Include air or hydraulic, voltage or phase changes, IP 55 or 65, class F or H insulated and multi-speed operation.
Duty Ratings
Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.
Brakes
Include over-speed, caliper style, band, and more. Please contact the factory.
Controls
Available in a wide range of standard and custom configurations for single or variable speed.
Corrosion Resistant Finishes
For operation in harsh or hazardous environments.
Manual Overrides
For winch operation in power loss situations.
Owner’s Manual
Product Sheet
4HS Series Product Sheet (PS4HS-A-0221)