4HWF Helical Worm Serie

Capacidad de 1,500 a 8,000 libras

Los cabrestantes eléctricos de la serie 4HWF de Thern cuentan con engranajes helicoidales/sin fin, lo que los hace ideales para aplicaciones que requieren un control de carga seguro y un posicionamiento preciso.

Hechos rápidos

  • Rodamientos de rodillos con brida
  • Tambor de acero soldado
  • Eje de tambor de acero sólido extendido
  • Conjuntos de cables metálicos
  • Motor montado en brida
  • Freno de disco del motor de retención de carga
  • Reductores de engranajes de accionamiento directo
  • Cumplimiento AMSE
  • Garantía limitada de 2 años

Modelos de serie

  • 4HWF1M
  • 4HWF2M
  • 4HWF4M
  • 4HWF6M
  • 4HWF8M

¿Necesita una cotización?

Si no está seguro de qué producto necesita y desea una cotización, complete un formulario de solicitud.

Consigue una cotización

4HWF Series — Modelo 4HWF1M Cabrestante eléctrico de servicio pesado.

Features

Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.

Brake is spring set, electrically released for positive load control.

Reducer is comprised of helical/worm gears and delivers lower efficiencies from 65% to 76% making winches well suited or applications requiring secure load control and accurate positioning. The heat-treated helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.

Bearings are self-aligning with cast housing to maintain smooth drum rotation.

Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.

Captures both ends in a fabricated steel frame for optimal strength and security.

Sold separately per customer request.

Please contact the factory.

Industry-leading two-year “Move It With Confidence” limited warranty.

Accessories/Options

The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series

Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.

Available options include base, wall or under hung installation.

Apply pressure to drum and wire rope to help maintain uniform winding.

Provide secondary shut-off for load travel in one or two directions.

Include air or hydraulic, voltage or phase changes, IP 55 or 65, class F or H insulated and multi-speed operation.

Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.

Include over-speed, caliper style, band, and more. Please contact the factory.

Available in a wide range of standard and custom configurations for single or variable speed.

For operation in harsh or hazardous environments.

For winch operation in power loss situations.

Emparejado frecuentemente con

Grúas y cabrestantes personalizados

Controles eléctricos

Conjuntos de cables metálicos

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.