4HWF Helical Worm Série

Capacité de 1 500 à 8 000 lb

Les treuils électriques Thern de la série 4HWF sont dotés d’un engrenage hélicoïdal/vis sans fin, ce qui les rend idéaux pour les applications nécessitant un contrôle sécurisé de la charge et un positionnement précis.

Faits rapides

  • Roulements à rouleaux à bride
  • Fût en acier soudé
  • Arbre de tambour rallongé en acier massif
  • Assemblages de câbles métalliques
  • Moteur monté sur bride
  • Frein à disque du moteur de maintien de charge
  • Réducteurs à entraînement direct
  • Conformité AMSE
  • Garantie limitée de 2 ans

Modèles de série

  • 4HWF1M
  • 4HWF2M
  • 4HWF4M
  • 4HWF6M
  • 4HWF8M

Besoin d'un devis ?

Si vous n’êtes pas sûr du produit dont vous avez besoin et souhaitez un devis, veuillez remplir un formulaire de demande.

Obtenez un devis

4HWF Series — Modèle 4HWF1M Treuil électrique robuste.

Features

Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.

Brake is spring set, electrically released for positive load control.

Reducer is comprised of helical/worm gears and delivers lower efficiencies from 65% to 76% making winches well suited or applications requiring secure load control and accurate positioning. The heat-treated helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.

Bearings are self-aligning with cast housing to maintain smooth drum rotation.

Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.

Captures both ends in a fabricated steel frame for optimal strength and security.

Sold separately per customer request.

Please contact the factory.

Industry-leading two-year “Move It With Confidence” limited warranty.

Accessories/Options

The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series

Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.

Available options include base, wall or under hung installation.

Apply pressure to drum and wire rope to help maintain uniform winding.

Provide secondary shut-off for load travel in one or two directions.

Include air or hydraulic, voltage or phase changes, IP 55 or 65, class F or H insulated and multi-speed operation.

Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.

Include over-speed, caliper style, band, and more. Please contact the factory.

Available in a wide range of standard and custom configurations for single or variable speed.

For operation in harsh or hazardous environments.

For winch operation in power loss situations.

Emparejado frecuentemente con

Grúas y cabrestantes personalizados

Controles eléctricos

Conjuntos de cables metálicos