ENSIGN 500
Un mât et une perche plus longs offrent une hauteur de crochet accrue, ce qui fait de l’Ensign 500 un excellent choix pour dégager des objets de grande taille, tels que des rails de main, ou soulever des charges hautes.
FAITS SAILLANTS
- Charge nominale jusqu’à 500 lbs (226 kg)
- Fonctionnement électrique, hydraulique ou pneumatique
- Tourne 360 º
- Ancre à déConnexion Rapide
- Disponible en 5 finitions
- Garantie standard de 2 ans
MODÈLES DE SERIE
- 5PA5-M1
- 5PA10
BESOIN D’UN DEVIS?
Si vous n’êtes pas sûr de quel produit vous avez besoin et souhaitez un devis, s’il vous plaît remplir un formulaire de demande.

Ensign 500 — grue modèle 5PA5-M1 avec treuil à main M4022PB-K en zinc et socle 5BP5.



IMPORTANT:
It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
Ensign 500 Lift Below Floor Level2 |
|||||||||||
Lift Below Floor Level1 |
Wire Rope Diameter |
Wire Rope Length3 |
Winch Configurations |
||||||||
Min Pos B4 |
Max Pos B1 |
M1 |
M2 |
M3 |
E2 |
||||||
(ft) |
(m) |
(ft) |
(m) |
(in) |
(mm) |
(ft) |
(m) |
||||
0 |
0 |
5 |
1.5 |
3/16 |
4.8 |
20 |
6.0 |
• |
— |
• |
— |
8 |
2.4 |
13 |
3.9 |
3/16 |
4.8 |
28 |
8.5 |
• |
— |
• |
— |
16 |
4.8 |
21 |
6.4 |
3/16 |
4.8 |
36 |
10.9 |
• |
— |
• |
— |
25 |
7.6 |
30 |
9.1 |
3/16 |
4.8 |
45 |
13.7 |
• |
— |
• |
— |
40 |
12.1 |
45 |
13.7 |
3/16 |
4.8 |
60 |
18.2 |
— |
— |
• |
— |
55 |
16.7 |
60 |
18.2 |
3/16 |
4.8 |
75 |
22.8 |
— |
— |
• |
— |
0 |
0 |
5 |
1.5 |
1/4 |
6.4 |
20 |
6.0 |
— |
• |
• |
• |
8 |
2.4 |
13 |
3.9 |
1/4 |
6.4 |
28 |
8.5 |
— |
• |
• |
• |
16 |
4.8 |
21 |
6.4 |
1/4 |
6.4 |
36 |
10.9 |
— |
• |
• |
• |
25 |
7.6 |
30 |
9.1 |
1/4 |
6.4 |
45 |
13.7 |
— |
• |
• |
• |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products referred to in the owner’s manual. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. 3 Wire rope assemblies include a hood and swaged ball fitting to work with quick-disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. |
Pedestal Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
500 |
226 |
17 |
431 |
74 |
1879 |
A-2 |
400 |
181 |
22 |
558 |
79 |
2006 |
A-3 |
300 |
136 |
28 |
711 |
87 |
2209 |
A-4 |
250 |
113 |
36 |
914 |
96 |
2438 |
B-1 |
500 |
226 |
14 |
355 |
76 |
1930 |
B-2 |
400 |
181 |
17 |
431 |
83 |
2108 |
B-3 |
300 |
136 |
22 |
558 |
91 |
2311 |
B-4 |
250 |
113 |
28 |
711 |
101 |
2565 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |
Flush/Wall Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
500 |
226 |
17 |
431 |
60 |
1524 |
A-2 |
400 |
181 |
22 |
558 |
65 |
1651 |
A-3 |
300 |
136 |
28 |
711 |
73 |
1854 |
A-4 |
250 |
113 |
36 |
914 |
82 |
2082 |
B-1 |
500 |
226 |
14 |
355 |
62 |
1574 |
B-2 |
400 |
181 |
17 |
431 |
69 |
1752 |
B-3 |
300 |
136 |
22 |
558 |
77 |
1955 |
B-4 |
250 |
113 |
28 |
711 |
87 |
2209 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |

- Carbon Steel Anchor Kit AN50A-5 – Carbon steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 1/2 inch x 5-1/2 inch.
- 304 Stainless Steel Anchor Kit AN50A-5S – Type 304 stainless steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 1/2 inch x 5-1/2 inch.Approx. ship weight: 1.4 lb (0.6 kg).

- HB10-12-25 – Red Enamel Steel, 1/8 to 1/4 inch wire rope.
- HB10S-12-25 – 304 Stainless Steel, 1/8 to 1/4 inch wire rope.Approx. ship weight: 10 lb (4.5 kg).

Wire Rope Capacities • 3/16 inch wire rope, 140 ft • 1/4 inch wire rope, 75 ft

- RK19-25S – 304 Stainless steel metal bracket attaches to base or other structure to hold free end of the wire rope when detached from crane. Not designed to hold a load. Approx. ship weight: 1 lb (0.45 kg).
- Longer Lift Distances Customized winch and crane configurations to accommodate longer lifts.
- Custom Colors & Finishes Custom colors and finishes are available to match your unique application.
- Extended Boom and Masts Thern can extend mast heights and boom lengths to fit your needs.
- Relocate the Winch The winch can be relocated to fit confined spaces or height restrictions.
- Special Bases Custom bases or mounting requirements can be manufactured to meet your unique situation.