ENSIGN 500
Langere mast en giek zorgen voor een grotere haakhoogte, waardoor de Ensign 500 een uitstekende keuze is voor het ruimen van hoge objecten, zoals leuningen, of het heffen van hoge lasten.
SNELLE FEITEN
- Draagvermogen tot 500 lbs (226 kg)
- Elektrische, hydraulische of pneumatische bediening
- Draait 360º
- Anker met snelkoppeling
- Verkrijgbaar in 5 afwerkingen
- 2 jaar standaardgarantie
SERIE MODELLEN
- 5PA5-M1
- 5PA10
OFFERTE NODIG?
Als u niet zeker weet welk product u nodig heeft en een offerte wilt ontvangen, vult u dan een aanvraagformulier in.

Ensign 500 — Model 5PA5-M1 kraan met M4022PB-K verzinkte handlier met tandwieloverbrenging en 5BP5 voetstuk.
Welded Steel Construction

Adjustable Height and Reach
Manual or Power Operation
Adjustable Winch Mount Plate
Corrosion Resistant Finish

360º Rotation
Easy Assembly/Disassembly
Quick Disconnect Anchor
Variety of Bases (sold separately)
Two-Year Warranty

IMPORTANT:
It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
Ensign® 500 Lift Below Floor Level2 |
|||||||||||
Lift Below Floor Level1 |
Wire Rope Diameter |
Wire Rope Length3 |
Winch Configurations |
||||||||
Min Pos B4 |
Max Pos B1 |
M1 |
M2 |
M3 |
E2 |
||||||
(ft) |
(m) |
(ft) |
(m) |
(in) |
(mm) |
(ft) |
(m) |
||||
0 |
0 |
5 |
1.5 |
3/16 |
4.8 |
20 |
6.0 |
• |
— |
• |
— |
8 |
2.4 |
13 |
3.9 |
3/16 |
4.8 |
28 |
8.5 |
• |
— |
• |
— |
16 |
4.8 |
21 |
6.4 |
3/16 |
4.8 |
36 |
10.9 |
• |
— |
• |
— |
25 |
7.6 |
30 |
9.1 |
3/16 |
4.8 |
45 |
13.7 |
• |
— |
• |
— |
40 |
12.1 |
45 |
13.7 |
3/16 |
4.8 |
60 |
18.2 |
— |
— |
• |
— |
55 |
16.7 |
60 |
18.2 |
3/16 |
4.8 |
75 |
22.8 |
— |
— |
• |
— |
0 |
0 |
5 |
1.5 |
1/4 |
6.4 |
20 |
6.0 |
— |
• |
• |
• |
8 |
2.4 |
13 |
3.9 |
1/4 |
6.4 |
28 |
8.5 |
— |
• |
• |
• |
16 |
4.8 |
21 |
6.4 |
1/4 |
6.4 |
36 |
10.9 |
— |
• |
• |
• |
25 |
7.6 |
30 |
9.1 |
1/4 |
6.4 |
45 |
13.7 |
— |
• |
• |
• |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products referred to in the owner’s manual. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. 3 Wire rope assemblies include a hood and swaged ball fitting to work with quick-disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. |
Pedestal Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
500 |
226 |
17 |
431 |
74 |
1879 |
A-2 |
400 |
181 |
22 |
558 |
79 |
2006 |
A-3 |
300 |
136 |
28 |
711 |
87 |
2209 |
A-4 |
250 |
113 |
36 |
914 |
96 |
2438 |
B-1 |
500 |
226 |
14 |
355 |
76 |
1930 |
B-2 |
400 |
181 |
17 |
431 |
83 |
2108 |
B-3 |
300 |
136 |
22 |
558 |
91 |
2311 |
B-4 |
250 |
113 |
28 |
711 |
101 |
2565 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |
Flush/Wall Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
500 |
226 |
17 |
431 |
60 |
1524 |
A-2 |
400 |
181 |
22 |
558 |
65 |
1651 |
A-3 |
300 |
136 |
28 |
711 |
73 |
1854 |
A-4 |
250 |
113 |
36 |
914 |
82 |
2082 |
B-1 |
500 |
226 |
14 |
355 |
62 |
1574 |
B-2 |
400 |
181 |
17 |
431 |
69 |
1752 |
B-3 |
300 |
136 |
22 |
558 |
77 |
1955 |
B-4 |
250 |
113 |
28 |
711 |
87 |
2209 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |
5BH5 WorkMate Portable Hitch-Mounted Crane Base

- Fast, Toolless Assembly
- Straight or Right-Angle Mounting From Vehicle Hitch
- Compatible with Multiple Thern Cranes
- Rotation Stop Limits Load
- Travel When Desired
- Deployable on Any Terrain
- Compatible with Standard 2-Inch Receiver
- Two-Year Warranty

- Carbon Steel Anchor Kit
AN50A-5 – Carbon steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 1/2 inch x 5-1/2 inch. - 304 Stainless Steel Anchor Kit
AN50A-5S – Type 304 stainless steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 1/2 inch x 5-1/2 inch.Approx. ship weight: 1.4 lb (0.6 kg).
Headache Ball

- HB10-12-25 – Red Enamel Steel, 1/8 to 1/4 inch wire rope.
- HB10S-12-25 – 304 Stainless Steel, 1/8 to 1/4 inch wire rope.Approx. ship weight: 10 lb (4.5 kg).
Cable Spooler

Wire Rope Capacities
• 3/16 inch wire rope, 140 ft
• 1/4 inch wire rope, 75 ft
Wire Rope Keeper

- RK19-25S – 304 Stainless steel metal bracket attaches to base or other structure to hold free end of the wire rope when detached from crane. Not designed to hold a load. Approx. ship weight: 1 lb (0.45 kg).
Drill-Drive Kits

- ED330-DW11 – 120 VAC, 11 amp, 330rpm drill-motor to power drive the hand winch. Only available for cranes configured with the M2 winch option. Includes 1-1/8” hex drive socket.
- ED300-DW06 – Cordless drill kit, 60 V Brushless Motor, 300rpm drill-motor to power drive the M2 hand winch option. Includes 1-1/8” hex drive socket.
- ED400-DW09 – Heavy Duty Cordless drill kit, 60 V Brushless Motor, 400rpm drill-motor to power drive the M2 hand winch option. Includes 1-1/8” hex drive socket.
Factory Load Test
Extended 5-Year Warranty
PE Stamp – Professional Engineer Stamp
Certifications
Explosion Proof Classification
Power Winch Operation
Custom Electric Controls
Drill-Drivable Winch
Limit Switch
Customization
- Longer Lift Distances
Customized winch and crane configurations to accommodate longer lifts. - Custom Colors & Finishes
Custom colors and finishes are available to match your unique application. - Extended Boom and Masts
Thern can extend mast heights and boom lengths to fit your needs. - Relocate the Winch
The winch can be relocated to fit confined spaces or height restrictions. - Special Bases
Custom bases or mounting requirements can be manufactured to meet your unique situation.