Portée horizontale plus courte que la série commander, l’Ensign 1000 offre une hauteur de crochet verticale accrue pour dégager des objets hauts, tels que des mains courantes, ou soulever des charges hautes.
FAITS SAILLANTS
Charge nominale jusqu’à 1200 lbs (544 kg)
Fonctionnement électrique, hydraulique ou pneumatique
Tourne 360 º
Ancre à déConnexion Rapide
Disponible en 5 finitions
Garantie standard de 2 ans
MODÈLES DE SERIE
5PA5
5PA10
BESOIN D’UN DEVIS?
Si vous n’êtes pas sûr de quel produit vous avez besoin et souhaitez un devis, s’il vous plaît remplir un formulaire de demande.
Ensign 1000 — grue en acier inoxydable modèle 5PA10S avec treuil électrique 4777-K et socle en acier inox 5BP10S.
Features Performance Specs Accessories/Options Dimensions Resources
Welded Steel Construction
Crane boom, mast and base fabricated from heavy-duty welded constructed structural steel pipe and tubing that limits deflection and meets ASTM standards.
Adjustable Height and Reach
Sheave adjusts to 4 different positions along boom, and boom angle adjusts in height with an easy-to-use adjustment screw.
Manual or Power Operation
Thern davit cranes can be configured with a spur or worm gear manual winch or power winch. Choose from Thern’s spur or worm gear hand winches or power winch with 115/1/60 as standard. Other voltages available as well as pneumatic, hydraulic or DC Volt power operation.
Adjustable Winch Mount Plate
TThe winch mount plate adjusts to 3 different positions on the mast and is easily removed with quick connect pins. Rotational handle attached to winch mounting plate.
Corrosion Resistant Finish
Electrostatic powder coated crane and stainless steel fasteners combine to resist corrosion in harsh environments. Other options available include: galvanized, stainless steel and epoxy finishes.
360º Rotation
Roller/ball bearing allows smooth and easy 360° crane rotation under load.
Easy Assembly / Disassembly
Quick-release clevis style stainless steel pins allow for easy assembly and quick disassembly for transport or storage. No tools required.
Quick Disconnect Anchor
For quickly attaching or removing wire rope equipped with a swaged ball fitting. This allows the operator to leave the wire rope attached to the load at all times and simply remove the rope from the winch and attach to the optional wire rope keeper, cable reel or standard keyhole slot on pedestal and wall mount bases.
Variety of Bases (sold separately)
Pedestal, flush, and wall mount allow for a variety of mounting solutions and are easily installed. Heavy-duty base cap included with lanyard keeps water and debris out of base when crane is removed. Standard powder coat finish on pedestal, flush and wall mounts. Other finish options available including galvanized, stainless steel and epoxy finishes.
Two-Year Warranty
Industry-leading two-year limited warranty on all our products.
IMPORTANT:
It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
Ensign 1000 Lift Below Floor Level2
Lift Below Floor Level1
Wire Rope Diameter
Wire Rope Length3
Winch Configurations
Min Pos B4
Max Pos B1
M1
M2
M3
E2
(ft)
(m)
(ft)
(m)
(in)
(mm)
(ft)
(m)
5
1.5
9
2.7
3/16
4.8
28
8.5
•
—
•
—
13
3.9
17
5.1
3/16
4.8
36
10.9
•
—
•
—
22
6.7
26
7.9
3/16
4.8
45
13.7
•
—
•
—
37
11.2
41
12.4
3/16
4.8
60
18.2
•
—
•
—
52
15.8
56
17.0
3/16
4.8
75
22.8
•
—
•
—
67
20.4
71
21.6
3/16
4.8
90
27.4
•
—
•
—
5
1.5
9
2.7
1/4
6.4
28
8.5
•
•
•
•
13
3.9
17
5.1
1/4
6.4
36
10.9
•
•
•
•
22
6.7
26
7.9
1/4
6.4
45
13.7
•
•
•
•
37
11.2
41
12.4
1/4
6.4
60
18.2
—
•
•
•
52
15.8
56
17.0
1/4
6.4
75
22.8
—
—
—
—
5
1.5
9
2.7
5/16
7.9
28
8.5
•
—
•
—
13
3.9
17
5.1
5/16
7.9
36
10.9
•
—
•
—
22
6.7
26
7.9
5/16
7.9
45
13.7
—
—
—
—
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory.
2 Performance Characteristics are for standard products referred to in the owner’s manual. Non-standard products may vary from the original design. Contact Thern, Inc. for this information.
3 Wire rope assemblies include a hood and swaged ball fitting to work with quick-disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory.
Pedestal Mount Performance Ratings2
Boom Position
Load Rating
Hook Reach
Hook Height
(lb)
(kg)
(in)
(mm)
(in)
(mm)
A-1
1200
544
26
660
93
2362
A-2
1000
453
32
812
98
2489
A-3
800
362
39
990
104
2641
A-4
650
294
48
1219
112
2844
B-1
1200
544
22
558
97
2463
B-2
1000
453
26
660
103
2616
B-3
800
362
32
812
110
2794
B-4
650
294
39
990
120
3048
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory.
2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information.
Flush/Wall Mount Performance Ratings2
Boom Position
Load Rating
Hook Reach
Hook Height
(lb)
(kg)
(in)
(mm)
(in)
(mm)
A-1
1200
544
26
660
79
2007
A-2
1000
453
32
812
84
2134
A-3
800
362
39
990
90
2286
A-4
650
294
48
1219
98
2489
B-1
1200
544
22
558
83
2108
B-2
1000
453
26
660
89
2261
B-3
800
362
32
812
96
2438
B-4
650
294
39
990
106
2692
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory.
2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information.
Base Installation Hardware
Torque controlled expansion anchor bolt kits.
Carbon Steel Anchor Kit
AN62A-6 – Carbon steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 5/8 inch x 6 inch.
304 Stainless Steel Anchor Kit
AN62A-6S – Type 304 stainless steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 5/8 inch x 6 inch.Approx. ship weight: 2.3 lb (1.0 kg).
Headache Ball
Keeps cable taut when no load is attached. Attach to cable.
HB10-12-25 – Red Enamel Steel, 1/8 to 1/4 inch wire rope.
HB10S-12-25 – 304 Stainless Steel, 1/8 to 1/4 inch wire rope.
HB10-25-38 – Red Enamel Steel, 1/4 to 3/8 inch wire rope.
HB10S-25-38 – 304 Stainless Steel, 1/4 to 3/8 inch wire rope.Approx. ship weight: 10 lb (4.5 kg).
Cable Spooler
RW50 – Keeps wire rope neat and safe when not in use. 316 stainless steel reel winds up wire rope when detached from crane. Suitable for wire ropes up to 5/16 diameter, capacity will vary. Not designed to hold a load. Rated capacity: 50 lbs. Approx. ship weight: 12 lb (5.5 kg).
Wire Rope Capacities
• 3/16 inch wire rope, 140 ft
• 1/4 inch wire rope, 75 ft
• 5/16 inch wire rope, 50 ft
Wire Rope Keeper
RK19-25S – 304 Stainless steel metal bracket attaches to base or other structure to hold free end of the wire rope when detached from crane. Not designed to hold a load. Approx. ship weight: 1 lb (0.45 kg).
Drill-Drive Kit
ED300-DW11 – 120 VAC, 11.5 amp, 300rpm drill-motor to power drive the worm gear hand winch (4WM2-K). Includes the 1-1/8 inch hex drive socket. Approx. ship weight: 12 lb (5.5 kg).
Factory Load Test
Upon request, Thern can test your crane prior to shipping, up to 125% of rated load. Contact factory for pricing and availability prior to order.
Extended 5-Year Warranty
Extend our standard 2-year warranty to 5 years. Contact factory for pricing and availability prior to order.
PE Stamp – Professional Engineer Stamp
Available upon request at time of order. Contact factory for pricing and availability prior to order.
Certifications
CE and ATEX certifications available. Contact factory for pricing and availability prior to order.
Explosion Proof Classification
Special configurations for use in explosive settings available. Contact factory for pricing and availability prior to order.
Power Winch Operation
AC electric in any voltage. DC electric, hydraulic and pneumatic power winches available.
Custom Electric Controls
Thern can build the high quality controls you need to operate your equipment.
Drill-Drivable Winch
A worm gear hand winch is also available for operation with a drill motor option.
Limit Switch
Add an emergency safety shut-off to ensure safe operation.
Customization
Customization is available for almost all Thern products and should always be performed by our engineers to assure the changes meet our stringent quality standards. Below are some of our more common customization requests. Only factory modifications are covered under warranty.
Longer Lift Distances
Customized winch and crane configurations to accommodate longer lifts.
Custom Colors & Finishes
Custom colors and finishes are available to match your unique application.
Extended Boom and Masts
Thern can extend mast heights and boom lengths to fit your needs.
Relocate the Winch
The winch can be relocated to fit confined spaces or height restrictions.
Special Bases
Custom bases or mounting requirements can be manufactured to meet your unique situation.