ENSIGN 1000
Shorter horizontal reach than the Commander Series, the Ensign 1000 features increased vertical hook height for clearing tall objects, such as handrails, or lifting tall loads.
QUICK FACTS
- Load ratings up to 1200 lbs (544 kg)
- Electric, Hydraulic or Pneumatic Operation
- Rotates 360º
- Quick-Disconnect Anchor
- Available in 5 finishes
- 2-Year Standard Warranty
SERIES MODELS
- 5PA5
- 5PA10
NEED A QUOTE?
If you’re not sure what product you need and would like a quote, please fill out a request form.

Ensign 1000 — Model 5PA10S stainless steel crane with 4777-K electric winch and 5BP10S stainless steel pedestal base.



IMPORTANT:
It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
Ensign 1000 Lift Below Floor Level2 |
|||||||||||
Lift Below Floor Level1 |
Wire Rope Diameter |
Wire Rope Length3 |
Winch Configurations |
||||||||
Min Pos B4 |
Max Pos B1 |
M1 |
M2 |
M3 |
E2 |
||||||
(ft) |
(m) |
(ft) |
(m) |
(in) |
(mm) |
(ft) |
(m) |
||||
5 |
1.5 |
9 |
2.7 |
3/16 |
4.8 |
28 |
8.5 |
• |
— |
• |
— |
13 |
3.9 |
17 |
5.1 |
3/16 |
4.8 |
36 |
10.9 |
• |
— |
• |
— |
22 |
6.7 |
26 |
7.9 |
3/16 |
4.8 |
45 |
13.7 |
• |
— |
• |
— |
37 |
11.2 |
41 |
12.4 |
3/16 |
4.8 |
60 |
18.2 |
• |
— |
• |
— |
52 |
15.8 |
56 |
17.0 |
3/16 |
4.8 |
75 |
22.8 |
• |
— |
• |
— |
67 |
20.4 |
71 |
21.6 |
3/16 |
4.8 |
90 |
27.4 |
• |
— |
• |
— |
5 |
1.5 |
9 |
2.7 |
1/4 |
6.4 |
28 |
8.5 |
• |
• |
• |
• |
13 |
3.9 |
17 |
5.1 |
1/4 |
6.4 |
36 |
10.9 |
• |
• |
• |
• |
22 |
6.7 |
26 |
7.9 |
1/4 |
6.4 |
45 |
13.7 |
• |
• |
• |
• |
37 |
11.2 |
41 |
12.4 |
1/4 |
6.4 |
60 |
18.2 |
— |
• |
• |
• |
52 |
15.8 |
56 |
17.0 |
1/4 |
6.4 |
75 |
22.8 |
— |
— |
— |
— |
5 |
1.5 |
9 |
2.7 |
5/16 |
7.9 |
28 |
8.5 |
• |
— |
• |
— |
13 |
3.9 |
17 |
5.1 |
5/16 |
7.9 |
36 |
10.9 |
• |
— |
• |
— |
22 |
6.7 |
26 |
7.9 |
5/16 |
7.9 |
45 |
13.7 |
— |
— |
— |
— |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products referred to in the owner’s manual. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. 3 Wire rope assemblies include a hood and swaged ball fitting to work with quick-disconnect anchor on winches, cable spooler and wire rope keeper. 316SS wire rope is also available. Please contact the factory. |
Pedestal Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
1200 |
544 |
26 |
660 |
93 |
2362 |
A-2 |
1000 |
453 |
32 |
812 |
98 |
2489 |
A-3 |
800 |
362 |
39 |
990 |
104 |
2641 |
A-4 |
650 |
294 |
48 |
1219 |
112 |
2844 |
B-1 |
1200 |
544 |
22 |
558 |
97 |
2463 |
B-2 |
1000 |
453 |
26 |
660 |
103 |
2616 |
B-3 |
800 |
362 |
32 |
812 |
110 |
2794 |
B-4 |
650 |
294 |
39 |
990 |
120 |
3048 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |
Flush/Wall Mount Performance Ratings2 |
||||||
Boom Position |
Load Rating |
Hook Reach |
Hook Height |
|||
(lb) |
(kg) |
(in) |
(mm) |
(in) |
(mm) |
|
A-1 |
1200 |
544 |
26 |
660 |
79 |
2007 |
A-2 |
1000 |
453 |
32 |
812 |
84 |
2134 |
A-3 |
800 |
362 |
39 |
990 |
90 |
2286 |
A-4 |
650 |
294 |
48 |
1219 |
98 |
2489 |
B-1 |
1200 |
544 |
22 |
558 |
83 |
2108 |
B-2 |
1000 |
453 |
26 |
660 |
89 |
2261 |
B-3 |
800 |
362 |
32 |
812 |
96 |
2438 |
B-4 |
650 |
294 |
39 |
990 |
106 |
2692 |
1 Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact factory. 2 Performance Characteristics are for standard products. Non-standard products may vary from the original design. Contact Thern, Inc. for this information. |

- Carbon Steel Anchor Kit AN62A-6 – Carbon steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 5/8 inch x 6 inch.
- 304 Stainless Steel Anchor Kit AN62A-6S – Type 304 stainless steel anchor body, nut and washer with type 316 stainless steel expansion sleeve. Size: 5/8 inch x 6 inch.Approx. ship weight: 2.3 lb (1.0 kg).

- HB10-12-25 – Red Enamel Steel, 1/8 to 1/4 inch wire rope.
- HB10S-12-25 – 304 Stainless Steel, 1/8 to 1/4 inch wire rope.
- HB10-25-38 – Red Enamel Steel, 1/4 to 3/8 inch wire rope.
- HB10S-25-38 – 304 Stainless Steel, 1/4 to 3/8 inch wire rope.Approx. ship weight: 10 lb (4.5 kg).

Wire Rope Capacities • 3/16 inch wire rope, 140 ft • 1/4 inch wire rope, 75 ft • 5/16 inch wire rope, 50 ft

- RK19-25S – 304 Stainless steel metal bracket attaches to base or other structure to hold free end of the wire rope when detached from crane. Not designed to hold a load. Approx. ship weight: 1 lb (0.45 kg).

- ED330-DW11 – 120 VAC, 11 amp, 330rpm drill-motor to power drive the hand winch. Only available for cranes configured with the M2 winch option. Includes 1-1/8” hex drive socket.
- ED300-DW06 – Cordless drill kit, 60 V Brushless Motor, 300rpm drill-motor to power drive the M2 hand winch option. Includes 1-1/8” hex drive socket.
- ED400-DW09 – Heavy Duty Cordless drill kit, 60 V Brushless Motor, 400rpm drill-motor to power drive the M2 hand winch option. Includes 1-1/8” hex drive socket.
- Longer Lift Distances Customized winch and crane configurations to accommodate longer lifts.
- Custom Colors & Finishes Custom colors and finishes are available to match your unique application.
- Extended Boom and Masts Thern can extend mast heights and boom lengths to fit your needs.
- Relocate the Winch The winch can be relocated to fit confined spaces or height restrictions.
- Special Bases Custom bases or mounting requirements can be manufactured to meet your unique situation.