4HWF Helical Worm Serie
Capaciteit van 1.500 tot 8.000 pond
De krachtige lieren uit de 4HWF-serie zijn voorzien van een spiraal-/wormoverbrenging, waardoor ze ideaal zijn voor toepassingen die veilige lastcontrole en nauwkeurige positionering vereisen.
Snelle feiten
- Rollagers in flensstijl
- Gelaste stalen trommel
- Verlengde massief stalen trommelas
- Staalkabelassemblages
- Op flens gemonteerde motor
- Lasthoudende motor schijfrem
- Tandwielreductoren met directe aandrijving
- AMSE-naleving
- 2 jaar beperkte garantie
Serie modellen
- 4HWF1M
- 4HWF2M
- 4HWF4M
- 4HWF6M
- 4HWF8M
Een offerte nodig?
Als u niet zeker weet welk product u nodig heeft en u wilt een offerte, vul dan een aanvraagformulier in.
4HWF Series — Model 4HWF1M Krachtige lier voor zwaar gebruik.
Flange Mounted Motor
Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.
Load Holding Motor Disc Brake
Brake is spring set, electrically released for positive load control.
Direct Drive Gear Reducer
Reducer is comprised of helical/worm gears and delivers lower efficiencies from 65% to 76% making winches well suited or applications requiring secure load control and accurate positioning. The heat-treated helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.
Flange Style Roller Bearing
Bearings are self-aligning with cast housing to maintain smooth drum rotation.
Welded Steel Drum
Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.
Extended Steel Drum Shaft
Captures both ends in a fabricated steel frame for optimal strength and security.
Wire Rope Assemblies
Sold separately per customer request.
AMSE B30.7 Compliance
Please contact the factory.
Two-Year Warranty
Industry-leading two-year “Move It With Confidence” limited warranty.
Vertical Lead Block
The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series
Drum Modifications
Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.
Mounting Options
Available options include base, wall or under hung installation.
Cable Pressure Bars
Apply pressure to drum and wire rope to help maintain uniform winding.
Light Switches
Provide secondary shut-off for load travel in one or two directions.
Motors
Include air or hydraulic, voltage or phase changes, IP 55 or 65, class F or H insulated and multi-speed operation.
Duty Ratings
Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.
Brakes
Include over-speed, caliper style, band, and more. Please contact the factory.
Controls
Available in a wide range of standard and custom configurations for single or variable speed.
Corrosion Resistant Finishes
For operation in harsh or hazardous environments.
Manual Overrides
For winch operation in power loss situations.
Owner’s Manual
4HPF, 4HWF, 4HBP, 4HBN (A7944D)
Product Sheet
4HWF Product Sheet (PS4HWF-A-0221)
At A Glance
Industrial Brochure
Vaak gecombineerd met
Aangepaste kranen en lieren
Elektrische bediening
