SÉRIE 4WP2 ATLAS WORM GEAR PORTABLE TREUIL DE PUISSANCE
Capacité maximale de 2000 lb </ h2>
Les treuils Thern Atlas vous donnent la force de levage quand et où vous en avez besoin. Des poignées de levage pratiques et une commande suspendue rendent le positionnement et le fonctionnement super pratiques.
FAITS EN BREF
- Engrenages coupés à la machine
- bain d’huile inclus
- Frein mécanique interne
- Roulements à billes
- Plaque de pression
- Ancrage de câble double fonction
- Options de montage
- Garantie limitée de 2 ans
MODÈLES DE SÉRIE
- 4WP2
- 4WP2T8
- 4WP2TC
BESOIN D’UN DEVIS?
Si vous n’êtes pas sûr du produit dont vous avez besoin et souhaitez un devis, veuillez remplir un formulaire de demande.
> Modèle Treuil électrique portatif à engrenages à vis sans fin Atlas 4WP2T8
|
Load Rating |
Line Speed |
Drum Capacity2 |
||||||||||||||||||||
|
Model No. |
Motor Description |
Motor HP |
1st Layer |
Mid Drum |
Full Drum |
Wire Rope Dia.1 |
1st Layer |
Full Drum |
1st Layer |
Mid Drum |
Full Drum |
Approx. Ship Weight |
||||||||||
|
(lb) |
(kg) |
(lb) |
(kg) |
(lb) |
(kg) |
(in) |
(mm) |
(fpm) |
(mpm) |
(fpm) |
(mpm) |
(ft) |
(m) |
(ft) |
(m) |
(ft) |
(m) |
(lb) |
(kg) |
|||
|
4WP23 |
includes controls |
1.3 |
2000 |
907.1 |
1500 |
680.3 |
1200 |
544.3 |
1/4 |
6.4 |
8 |
2.4 |
13 |
3.9 |
11 |
3.3 |
35 |
10.6 |
77 |
23.4 |
85 |
38.6 |
|
4WP2T8-2000-84 |
includes controls |
1.3 |
2000 |
907.1 |
1200 |
544.3 |
800 |
362.8 |
1/4 |
6.4 |
8 |
2.4 |
19 |
5.7 |
19 |
5.7 |
130 |
39.6 |
280 |
85.3 |
101 |
45.8 |
|
ATLAS winch – 8″ drum – for pulling or lifting |
5/16 |
7.9 |
8 |
2.4 |
19 |
5.7 |
15 |
4.5 |
85 |
25.9 |
190 |
57.9 |
— |
— |
||||||||
|
4WP2TC-2000-84 |
includes controls, clutch model – 5.5″ drum, for horizontal pulling only |
1.3 |
2000 |
907.1 |
1200 |
544.3 |
800 |
362.8 |
1/4 |
6.4 |
8 |
2.4 |
19 |
5.7 |
12 |
3.6 |
87 |
26.5 |
190 |
57.9 |
106 |
48.0 |
|
Please contact factory or nearest Thern distributor for firm fixed price and delivery. 1 Minimum wire rope diameter is 1/4 inch. 2 Actual drum capacities may be 25-30% less due to non-uniform winding. Wire rope tension will also affect drum capacity. 3 Model 4WP2, 115 VAC motor includes an 8-foot power cord with grounded plug, and NEMA 4 push button pendant on 6-foot cord. 4 For 4WP2T8 and 4WP2TC, 115 VAC motor includes a 16-foot power cord with grounded plug, and push button pendant on 16-foot cord. |
||||||||||||||||||||||
4WP2 and 4WP2T Series – Winch Dimensions |
||||||||||||||
|
Model |
A 1 |
B 1 |
C |
D |
E |
F |
H 1 |
|||||||
|
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
|
|
4WP2 |
15.63 |
397 |
17.28 |
438 |
1.72 |
43.6 |
— |
— |
— |
— |
— |
— |
12.84 |
326 |
|
4WP2T8-2000-8 |
16.62 |
422 |
17.80 |
452 |
2.75 |
69.8 |
4.88 |
123.9 |
1.44 |
36.5 |
6.43 |
163 |
14.25 |
361.9 |
|
4WP2TC-2000-8 |
17.34 |
440 |
17.80 |
452 |
4.02 |
102 |
4.88 |
123.9 |
2.16 |
54.8 |
6.43 |
163 |
14.25 |
361.9 |
|
Model |
J |
K |
M |
N |
P |
R |
S (hole dia.) |
|||||||
|
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
|
|
4WP2 |
1.72 |
43.6 |
3.75 |
95.2 |
13.50 |
342.9 |
— |
— |
4.00 |
101.6 |
— |
— |
0.41 |
10.4 |
|
4WP2T8-2000-8 |
2.25 |
57.1 |
5.81 |
147.5 |
10.25 |
260.3 |
1.25 |
31.7 |
7.00 |
177.8 |
11.38 |
289 |
0.41 |
10.4 |
|
4WP2TC-2000-8 |
2.25 |
57.1 |
5.81 |
147.5 |
10.25 |
260.3 |
1.25 |
31.7 |
7.00 |
177.8 |
11.38 |
289 |
0.41 |
10.4 |
|
1 Dimensions A, B and H may vary with motor selection. Dimensions are for reference only and subject to change without notice. |
||||||||||||||
IMPORTANT: It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
4WP2 and 4WP2T Series — Drum Dimensions |
||||||||
|
Model Extension |
Drum Dia. |
Flange Dia. |
Drum Width |
Fleet Angle Distance 1 |
||||
|
(in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
(ft) |
(m) |
|
|
4WP2 |
2.50 |
63.5 |
5.00 |
127 |
5.00 |
127 |
8 |
2.4 |
|
4WP2T8-2000-8 |
2.50 |
63.5 |
7.00 |
177.8 |
8.00 |
203.2 |
13 |
3.9 |
|
4WP2TC-2000-8 |
2.50 |
63.5 |
7.00 |
177.8 |
5.50 |
139.7 |
9 |
2.7 |
|
1 Recommended minimum distance between drum and lead sheave for smooth drum. Dimensions are for reference only and subject to change without notice. |
||||||||
IMPORTANT: It is the owner’s or operator’s responsibility to determine the suitability of the equipment to its intended use. Study all applicable codes, manuals and regulations. Be sure to read the Owner’s Manual supplied with the equipment before operating it.
4WP2 Series Control Options and Accessories |
|||
|
Model |
Description |
Approx. Ship Weight |
|
|
(lb) |
(kg) |
||
|
10L2A1 1 |
NEMA 1 control switch — mounted and wired |
3 |
1.4 |
|
10L2A41 1 |
NEMA 4 watertight control switch — mounted and wired |
7 |
3.2 |
|
TPL-4WP2T8 |
Two-Part Line Kit — not available for 4WP2 Series |
4 |
1.8 |
|
1 Controls for 115V, single phase, 60 cycle include an 8-ft power cord with grounded plug. CUSTOM CONTROLS are available including wireless remote control, variable speed control, electronic overload, and enclosures for special environments. Please contact factory or nearest Thern Distributor for firm fixed price and delivery. |
|||
