4HPF Helical Parallel Serie

Capacità da 2.000 a 25.000 libbre

Gli argani elettrici della serie Thern 4HPF sono dotati di ingranaggi elicoidali/paralleli ad alta efficienza che li rendono ideali per applicazioni che richiedono lunghe distanze di viaggio e velocità di linea più elevate.

I fatti in breve

  • Cuscinetti a rulli di tipo flangiato
  • Tamburo in acciaio saldato
  • Albero del tamburo esteso in acciaio massiccio
  • Assemblaggi di funi metalliche
  • Motore montato su flangia
  • Freno a disco del motore di mantenimento del carico
  • Riduttori a trasmissione diretta
  • Adempimenti AMSE
  • Garanzia limitata di 2 anni

Modelli di serie

  • 4HPF2M
  • 4HPF3M
  • 4HPF5M
  • 4HPF7M
  • 4HPF9M
  • 4HPF15M
  • 4HPF20M
  • 4HPF25M

Hai bisogno di un preventivo?

Se non sei sicuro del prodotto di cui hai bisogno e desideri un preventivo, compila il modulo di richiesta.

Ottieni un preventivo

4HPF Series — Modello 4HPF Helical/Parallel Verricello elettrico per carichi pesanti.

Features

Motor is a 230 or 460 volt, 3 phase motor, 60 cycle, IP 54*, TEFC severe duty, reversible, class B or F insulated, continuous duty brake motor. Standard motors comply with relevant standards including NEMA, MG1, ANSI, CSA, IEC1 and ABS.

Brake is spring set, electrically released for positive load control.

Reducer is comprised of helical/worm gears and delivers lower efficiencies from 65% to 76% making winches well suited or applications requiring secure load control and accurate positioning. The heat-treated helical/worm gear set provides improved durability and operates in an oil bath, enclosed in a high strength cast iron gear case, SAE class 30. Double lip oil seals keep oil in and contaminants out. Large capacity bearings ensure long life. Speed reducers meet AGMA standards.

Bearings are self-aligning with cast housing to maintain smooth drum rotation.

Drum has outside flange anchors, which allow for uniform winding and helps to extend life of wire rope. Anchors allow cable to be over wound or under wound from either side of the drum.

Captures both ends in a fabricated steel frame for optimal strength and security.

Sold separately per customer request.

Please contact the factory.

Industry-leading two-year “Move It With Confidence” limited warranty.

Accessories/Options

The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series

Available modifications include grooved drums, multiple compartment drums and modified drum widths and diameters.

Clutch is manually operated and disengages for rapid payout of wire rope when not under load. Adjustable drag brake on the drum prevents over-spooling during payout. Clutch option is for horizontal pulling only.

Available options include base, wall or under hung installation.

Apply pressure to drum and wire rope to help maintain uniform winding.

Provide secondary shut-off for load travel in one or two directions.

Include air or hydraulic, voltage or phase changes, IP 55 or 65, class F or H insulated and multi-speed operation.

Include IEEE 45 marine duty, tropical duty, severe duty and explosion proof ratings.

Include over-speed, caliper style, band, and more. Please contact the factory.

Available in a wide range of standard and custom configurations for single or variable speed.

For operation in harsh or hazardous environments.

For winch operation in power loss situations.

Spesso abbinato a

Gru e argani personalizzati

Controlli elettrici

Assemblaggi di funi metalliche