C Série

Capacité jusqu’à 10 tonnes

Conçus conformément aux normes DNV, les treuils pneumatiques de la série C de Thern présentent des innovations qui les rendent plus rapides, plus légers, plus sûrs, plus polyvalents et plus résistants à la corrosion que jamais.

Faits rapides

  • Homologation de type DNV disponible
  • Arrêt d’urgence de série
  • Vanne de commande de verrouillage neutre
  • Protection de surcharge
  • Rondelles NORD-LOCK
  • Ancrage de câble à coin double direction
  • Haute résistance à la corrosion
  • Œillets de levage amovibles
  • Conforme aux exigences ASME 30.7
  • Forfaits CE disponibles
  • Garantie limitée de 2 ans

Modèles de série

  • TA2.5C Series
  • TA5C Series
  • TA10C Series

Besoin d'un devis ?

Si vous n’êtes pas sûr du produit dont vous avez besoin et souhaitez un devis, veuillez remplir un formulaire de demande.

Obtenez un devis

C Series — Modèle TA5C Series Treuil pneumatique.

Features

Internally lubricated for reliable power and long service life providing high capacity with faster line speeds.

No Content

Count on smooth control with variable speed, making it ideal for both precision spotting and long lifts.

Spring engaged, air pressure released and oil cooled for extended duty cycles and long life.

No Content

No Content

No Content

Applied with a zinc primer for ultimate protection in harsh environments.

Compact design and high efficiency gearing reduce power loss and heat generation while increasing service life. Gears operate in oil bath. Double lip oil seals keep oil in and contaminants out.

New configuration provides easier access for maintenance; drain and fill plugs now located outside of drum, eliminating need to remove wire rope for maintenance.

No Content

No Content

Wedge style rope anchor allows easy, on-site rope installation for either overwound or underwound applications.

Standard units designed and built to meet this specification.

No Content

Leading the industry with our Move It with Confidence Two-Year Limited Warranty.

Accessories/Options

Protects motor and winch during operation. Movable with forklift.

Steel construction and hand operated to help wire rope unwind uniformly.

Maintains uniform winding of wire rope.

Single or double available. Attached to the exhaust ports to reduce noise.

Maintains air quality to the winch. Required for warranty compliance.

Heavy-duty steel mesh helps protect operators, yet allows visibility of wire rope winding. Adjusts for different rope payout angles. Fasteners and drum guard are coated with Magni 567 or are stainless steel for corrosion protection.

Locks out the drum securely in desired position when winch is not in use.

Pneumatic rotary travel limits with quick response time, limits travel in both directions.

Match requested existing bolt patterns for convenient winch installation.

Spring engaged, air pressure released and oil cooled for extended duty cycles and long life.

Prevents unintended contact with brake.

Load lowering capability in case of power failure. Options include power diversion and emergency brake release.

Allow for multiple line connections and operation.

For more uniform wire rope winding. A custom option available upon request.

Winch mounted, full flow remote pendant control valve. Pendant or remote control configurations are hold-to-run and come standard with E-stop. Electric-Over-Air Controls: Electric proportional control. This option not available on standard DNV type approved winches.

Applied with a zinc primer for ultimate protection in harsh environments.

Specially rated for use in explosive settings. This custom option is available upon request.

Compliance with European machinery directive 2006/42/EC. Includes: single muffler, drum guard and travel limits.

Sold separately. A variety of wire rope assemblies and fittings are available per customer request. Please contact the factory.

Emparejado frecuentemente con

Grúas y cabrestantes personalizados

Controles eléctricos

Conjuntos de cables metálicos