4WP2D High Speed Worm Gear Série

Capacité jusqu’à 1 500 lb

Besoin d’un peu plus de vitesse ? Le 4WP2D8 est une unité à entraînement direct qui offre ce coup de pouce supplémentaire avec une charge nominale légèrement inférieure.

Faits rapides

  • Conception à entraînement direct
  • Engrenages à vis sans fin en bronze découpés à la machine
  • Bain d’huile fermé
  • Frein mécanique interne
  • Roulements à bille
  • Plaque de pression
  • Ancrage de câble double fonction
  • Options de montage
  • Garantie limitée de 2 ans

Modèles de série

  • 4WP2D8
  • 4WP2DC

Besoin d'un devis ?

Si vous n’êtes pas sûr du produit dont vous avez besoin et souhaitez un devis, veuillez remplir un formulaire de demande.

4WP2D High Speed Worm Gear — Modèle 4WP2D8 Atlas High-Speed Worm Gear Treuil électrique portatif.

Standard 115-volt single-phase motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.

Winch delivers high speed operation in both directions, even under full load.

Easy product customization and quick lead times.

Rugged work site durability in a lightweight package.

Bronze gearing provides accurate, high efficiency operation and long lasting service.

Gears operate with continuous lubrication to minimize wear. Oil seals keep oil in and dirt out.

Internal mechanical brake provides positive load control for lifting and lowering operations.

Bearings are self-aligning and provide smooth and efficient operation.

Minimize wear to extend wire rope life.

Applies pressure to drum and wire rope to help maintain uniform winding. Not available on clutch models.

Drum is equipped with both a standard set screw slot and keyhole slot on drum for quick disconnect with 3/8 inch swaged ball ends.

Handles provide for convenient work site lifting and positioning.

Durable paint finish combined with trivalent zinc plating protects against corrosion in harsh environments.

Industry-leading two-year limited warranty on all our products.

The Redline Series is used to change the direction of the rope, so the winch can be mounted in a convenient location and the Redline Lead Block will control the path of the rope to avoid obstacles, reduce hazard, and improve rope wear. Vertical Lead Block Series.

Manual clutch allows operator to disengage the drum for quick wire rope payout if desired. Not available on models equipped with pressure plate.

Floor, wall, or ceiling mount configurations available.

Allows for manual operation in case of power failure. Does not include handle.

Provides secondary shut-off to limit load travel in one or two directions. Not available on clutch models.

Available for motor brake models to provide dual braking.

Available in a wide range of standard and custom configurations for single or variable speed, including severe duty and explosion proof. Motors also available in hydraulic and pneumatic.

Available for operation in harsh or hazardous environments.

Available as part of the motor controls on electric models.

Emparejado frecuentemente con

Grúas y cabrestantes personalizados

Controles eléctricos

Conjuntos de cables metálicos

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.